TECHNO-Coat 330
TECHNO-Coat 330 is a single component heavy duty water based acrylic waterproofing liquid. Upon cure it forms a tough elastic membrane that is resistant to UV and weatherproof.
Applications
- Roof coating & protective barrier for a variety of low slope roof surfaces & substrates
- Waterproofing of concrete, asbestos, cement & gypsum board surfaces
- Can be applied over most dry single ply, asphaltic modified bitumen, and metal roofing systems.
- New & existing surfaces
TECHNO-Coat 215
TECHNO-Coat 215 is a heavy-duty ceiling, facade elements, terrace and roofs elastic waterproof coating system, based on specially developed highly elastic & UV resistant water-based Acrylic Polyurethane Emulsion (APE), Used as a liquid applied coating for crack-bridging, anti-carbonation barrier, waterproofing membrane, sun rays’ reflection layer and to prevent chloride ion ingress.
TECHNO-Coat 215 is a multi-layer system ensuring proper build-up of the thickness, making it a reliable waterproofing system. The coating performance can be enhanced for large roofs, by providing a fiber mesh that is embedded or sandwiched between the coats.
TECHNO-Coat 107
TECHNO-Coat 107 is a Two component, highly flexible waterproofing slurry for concrete and masonry based on a blend of cement and special binders, siliceous graded fillers, additives (part A) and modified acrylic polymer (part B).
After mixing part A with part B it will produce workable slurry that can be applied by brush or trowel.
TECHNO-Coat 107 complies with the requirements of standard: EN 14891 as Liquid-applied water impermeable product class CM01P.
Applications
- To protect concrete against concrete decay providing a chemical resistant barrier to corrosive salts and atmospheric gases.
- Waterproofing of water retaining structures such as swimming pools and water tanks.
- Flexible waterproofing of Balconies & Roofs
- Acts a protective coating against moisture for foundations and wet areas.
- To provide protection to concrete surfaces from carbonation and chloride attack.
TECHNO-Coat 05
TECHNO-Coat 05 is a liquid rubber Waterproofing membrane that can be built up to any
thickness in Single application providing permanently flexible, seamless Waterproofing solution for a wide range of substrates. It’s formulated from premium polymers, water-
membrane.
TECHNO-Coat 05 fully self-adhered, non-toxic and environmentally-friendly membrane ease of application allows unparalleled architectural freedom and enables shorter shut down times than traditional Waterproofing products.
TECHNO-Coat 05 is ideal for sealing leaky roof penetrations, Ductwork seams Cracks, tears, and punctures in almost any roof system providing a continuous non micro porosities liquid membrane for waterproofing and anti-corrosion protection Coat.
TECHNO-Latex
TECHNO-Latex is an acrylic-polymer latex, for a general purpose admixture which will produce polymer-modified concrete and mortar. it is also a bonding grout when mixed with sand and cement.
TECHNO-Clean G
TECHNO-Clean G is a bio-solvent for general cleaning purposes in particular oil removals from sand, seawater and machines